Abstract
This paper presents a Reconfigurable Stacked Patch Microstrip Antenna (RSPMA) uses a combination of aperture coupled technique and stacked patch technology for reducing feigned radiation patterns. This RSPMA consists of three FR-4 substrate layers with 4.7 mm thickness each and 3 mm thick of an air-filled substrate between stacked patches and the ground plane. The top patches are rectangular shaped with a T-shaped hole at the center and the bottom patches are T-shaped, both etched on top of substrate 1 and substrate 2 respectively act as a radiating element. Two H-shape designs of aperture slots of different sizes on the ground plane are positioned at the center of the ground plane with reference to the top patches and bottom patches. A copper strip is used as an ideal RF switch is implemented at the feed line network for the ON and OFF mode. Thus, by adjusting the switch mode, the resonance frequencies can be varied, thus frequency reconfigurable is achieved. The activation of the selected aperture slots will produce waves and radiates the signal to the radiating layers of the patch antenna. Hence, two different frequencies, either at 1.8 GHz or 2.3 GHz were achieved through the RSPMA with the gain of 3.691 dB and 2.291 dB, respectively. The antenna designed was simulated using CST Microwave Studio at an operating frequency of 1 GHz to 2.7 GHz. The RSPMA is said to be potentially beneficial to the wireless communication system.
Keywords:
Aperture Coupled, Aperture Slots, Reconfigurable, RF Switch, Stacked.